Pneumatic conveying system introduction

Pneumatic conveying systems are usually powered by air compressors, Roots blowers, or vacuum pumps, using air or inert gas as a medium to transport solid bulk materials (particles, powders, crushed materials, etc.) through connected material pipelines, using positive or negative pressure blowing or suction methods, from material sources such as storage silos, buffer hoppers, etc. to material destinations such as storage silos, packaging machines, forming machines, etc.

Positive pressure dense phase transmission tank pneumatic conveying system: uses relatively high pressure (above 1 bar) to transport powder or granular solid bulk materials through conveying pipelines with relatively low air consumption.

Open the feeding valve and breathing valve of the sending tank to start feeding.

Feed to the high level position of the sending tank, close the feeding valve and breathing valve, and the feeding is completed.

Open the compressed air delivery valve, inflate and pressurize the delivery tank, and open the pipeline booster.

The conveying timing starts, and the material is transported from the sending tank through the conveying pipeline.

After the delivery of materials in the sending tank is completed, the compressed air intake valve is closed.

The system enters the next batch of material conveying cycle.

Advantages:

Suitable for particles, powders, and mixed materials.

High conveying output.

Low material wear.

Advanced pipeline air booster technology and unique innovative pneumatic conveying scheme make conveying more efficient, stable, and energy-saving.

The conveying is gentle, slow, and has little wear.

The mixture has no layering and no decrease in quality.

Use lower compressed air and energy consumption.

The system is simple and pollution-free.

Stainless steel material, suitable for sanitary and anti-corrosion applications.

Industry and Materials:

Plastic related industries: Plastic raw material particles and powders. For example: PET, PE, PP, etc.

• Carbon black

• Food grains or fragile grains, coffee, peanut dough sugar

• Chemicals • Daily chemical laundry detergent • Power plant fly ash • Pet food • Sand

Characteristics:

It can almost meet the production requirements of most conveying output and conveying temperature. Suitable for:

High abrasive materials.

Fragile materials.

Mixed materials (to minimize the occurrence of almost no layering or layering of the transported mixed materials.)

Materials with a heavier specific gravity.

Materials with hygroscopicity.