Gerneral vacuum conveying and batching system for powder industry

Fixed vacuum conveying and batching system

In this drawing, several unit equipment are reasonably connected to form a small feeding system that integrates feeding, feeding, batching, mixing and dust recovery. Through the electrical control system, full (semi) automatic operation can be realized. This is the initial structure of our full (semi) automatic large system. Of course, the perfect system also includes many parts such as weighing unit and sensing unit, which will not be listed here, Contact our sales staff specifically. They will provide you with reasonable solutions according to your goals. Our designers will fully combine economic and efficient factors, select products with appropriate capacity, optimize product structure, and design solutions that meet your workshop installation according to your actual production needs. Of course, this cannot be separated from your patient communication with us at all stages.

As for our system, it has the following characteristics:

1. Scientific and reasonable structure layout, convenient installation and maintenance;

2. The material transmission process is closed, no dust leakage, no material loss, and the air quality in the workshop is good;

3. The materials used meet the national safety and quality standards and have a long service life;

4. The electrical control system is controlled in the whole process, with high automation of material transmission and low failure rate;

5. The system is suitable for the production mode that a single production line needs a large amount of raw materials supply;

In terms of your production and management, you have the following advantages:

1. High degree of automation: each link in the system adopts electrical control and integrates intelligent management system, which can realize unsupervised operation.

2. Strong continuous operation ability: reflected in the scientific design of the system structure, the connection error of each link is extremely low, and there will be no major errors in long time operation; The material used for the main body of the single equipment is solid and not easy to be damaged; The replacement of vulnerable parts is simple and time-consuming.

3. Low labor cost: the workshop only needs several electrician management personnel and machine repair management personnel, which greatly reduces the number of ordinary workers in the workshop and saves a lot of labor and management costs for the enterprise;

4. Convenient for scientific management: the workshop equipment layout is reasonable and the site arrangement is orderly, which is conducive to the implementation of 6S management by enterprises;

5. The environmental impact assessment is up to standard: during the operation of the equipment, the air quality of the workshop is up to standard, the health of the workshop staff can be guaranteed, there is no dust leakage to the outside, and there is no pollution to the air in the plant;

6. High enterprise benefits: the minimum manual use, the most lasting production line operation, the lowest maintenance cost, and the most effective management method maximize the enterprise benefits;

7. Comprehensive design consideration: design the production line in strict accordance with the requirements of the customer's production plan process, and try to consider every detail in combination with our company's rich historical experience, so as to avoid the possible errors caused by the subjective factors that often affect the human operation, so as to improve the product production quality.

Turnover vacuum conveying and batching system

In this drawing, several unit equipment are reasonably connected to form a small feeding system that integrates feeding, feeding, batching, mixing and dust recovery. Through the electrical control system, full (semi) automatic operation can be realized. This is the initial structure of our full (semi) automatic large system. Of course, the perfect system also includes weighing unit, sensor unit and many other parts, which will not be listed here, Contact our sales staff specifically. They will provide you with reasonable solutions according to your goals. Our designers will fully combine economic and efficient factors, select products with appropriate capacity, optimize product structure, and design solutions that meet your workshop installation according to your actual production needs. Of course, this cannot be separated from your patient communication with us at all stages.

As for our system, it has the following characteristics:

1. Scientific and reasonable structure layout, convenient installation and maintenance;

2. The material transmission process is closed, no dust leakage, no material loss, and the air quality in the workshop is good;

3. The materials used meet the national safety and quality standards and have a long service life;

4. The electrical control system is controlled in the whole process, with high automation of material transmission and low failure rate;

5. This system is suitable for the cow production mode in which a single production line can supply the most important raw materials, but multiple production lines can operate at the same time;

In terms of your production and management, you have the following advantages:

1. High degree of automation: each link in the system adopts electrical control, and integrates intelligent management system, which can realize unsupervised operation.

2. Strong continuous operation ability: reflected in the scientific design of the system structure, the connection error of each link is extremely low, and there will be no major mistakes in the long time operation; The material used for the main body of the single equipment is solid and not easy to be damaged; The replacement of vulnerable parts is simple and time-consuming.

3. Low labor cost: the workshop only needs several electrician management personnel and machine repair management personnel, which greatly reduces the number of ordinary workers required in the workshop and saves a lot of labor and management costs for the enterprise;

4. Convenient for scientific management: the workshop equipment layout is reasonable and the site arrangement is orderly, which is conducive to the implementation of 6S management by enterprises;

5. The environmental impact assessment is up to standard: during the operation of the equipment, the air quality of the workshop is up to standard, the health of the workshop staff can be guaranteed, there is no dust leakage to the outside, and there is no pollution to the air in the plant;

6. High enterprise benefits: the minimum manual use, the most lasting production line operation, the lowest maintenance cost, and the most effective management method maximize the enterprise benefits;

7. The design is comprehensive, and the production line design is carried out in strict accordance with the customer's production plan process requirements, and every detail is taken into consideration in combination with our company's rich historical experience, so as to avoid the possible errors caused by the subjective factors that often affect the human operation, thus improving the product production quality;

Suspended vacuum conveying and batching system

In this drawing, several unit equipment are reasonably connected to form a small feeding system that integrates feeding, feeding, batching, mixing and dust recovery. Through the electrical control system, full (semi) automatic operation can be realized. This is the initial structure of our full (semi) automatic large system. Of course, the perfect system also includes weighing unit, sensor unit and many other parts, which will not be listed here, Contact our sales staff specifically. They will provide you with reasonable solutions according to your goals. Our designers will fully combine economic and efficient factors, select products with appropriate capacity, optimize product structure, and design solutions that meet your workshop installation according to your actual production needs. Of course, this cannot be separated from your patient communication with us at all stages.

As for our system, it has the following characteristics:

1. Scientific and reasonable structure layout, convenient installation and maintenance;

2. The material transmission process is closed, no dust leakage, no material loss, and the air quality in the workshop is good;

3. The materials used meet the national safety and quality standards and have a long service life;

4. The electrical control system is controlled in the whole process, with high automation of material transmission and low failure rate;

5. This system is suitable for the cow production mode in which a single production line can supply the most important raw materials, but multiple production lines can operate at the same time;

In terms of your production and management, you have the following advantages:

1. High degree of automation: each link in the system adopts electrical control, and integrates intelligent management system, which can realize unsupervised operation.

2. Strong continuous operation ability: reflected in the scientific design of the system structure, the connection error of each link is extremely low, and there will be no major mistakes in the long time operation; The material used for the main body of the single equipment is solid and not easy to be damaged; The replacement of vulnerable parts is simple and time-consuming.

3. Low labor cost: the workshop only needs several electrician management personnel and machine repair management personnel, which greatly reduces the number of ordinary workers required in the workshop and saves a lot of labor and management costs for the enterprise;

4. Convenient for scientific management: the workshop equipment layout is reasonable and the site arrangement is orderly, which is conducive to the implementation of 6S management by enterprises;

5. The environmental impact assessment is up to standard: during the operation of the equipment, the air quality of the workshop is up to standard, the health of the workshop staff can be guaranteed, there is no dust leakage to the outside, and there is no pollution to the air in the plant;

6. High enterprise benefits: the minimum manual use, the most lasting production line operation, the lowest maintenance cost, and the most effective management method maximize the enterprise benefits;

7. The design is comprehensive, and the production line design is carried out in strict accordance with the customer's production plan process requirements, and every detail is taken into consideration in combination with our company's rich historical experience, so as to avoid the possible errors caused by the subjective factors that often affect the human operation, thus improving the product production quality;